1 x 1Kg Polyester Resin
1 x 20ml Hardener
1 x Paint Brush
3 x Mixing Sticks
1 x Bag of White Powder for making Polyester Putty
1 x 1m2 x 225g Fibreglass mat
1 x 250ml Acetone
1 x 10ml Catalyst Syringe
1 x Fibreglass glass advisor sheet
BOATS - For repairing fibreglass and plywood boats. Ideal for covering transom edges and for binding split or damaged spars, booms, spinnaker poles and oars. Rot proof and unaffected by marine growth, worms and borers.
SURFBOARDS – For the repair of all types of surfboards, water skis ect.
HOME – For repairing metal roofs, guttering and tiles, water tanks, fibro sheeting and roofing, sheep dips, water troughs, fibreglass furniture ect.
CARS & CARAVANS – For repairing rusted panels filling holes, dents ect. Completely waterproof and weather resistant.
Strand-chopped fibreglass matting for reinforcement. Completely waterproof and weather resistant.
1. Prepare the surface, sand in and around the area. Remove all dust and clean the area with acetone.
2. Cut the chopped strand mat to the required size and allow an extra centimetre around the edges. On tight curves, tear the mat to fit, adding extra pieces if needed. Put the mat on a clean surface until ready for use (e.g. newspaper).
3. Calculate the amount of catalyst (MEKP) required: on a warm day (warmer than 18 degrees) allow 1.5% whole on a cold day (cooler than 18 degrees) allow 2%. Do not mix more than you can use in 30 mins.
For 200mls of resin on a warm day use 1.5% or 3mls
For 200mls of resin on a cold day us 2% or 4mls
Use the syringe to measure the amount required.
4. Mix resin with catalyst using a stirring stick.
5. Brush a thick coat of resin onto the surface and then position the fibreglass on top of the wet resin. Add
another coat of resin taking care not to displace the fibres. Dab it, do not brush it. Make sure that every part
of the fibreglass is ‘wet out’ thoroughly (with no air bubbles). Allow to saturate and use a roller to squeeze
the air out of the fibres. Clean up with acetone.
6. Leave to cure for 1 to 2 hours.
NOTE: When using or working on virgin foam ensure the foam is sealed prior to use as application of fibreglass
(polyester) resin may dissolve the foam. Not suitable for epoxy surfboards.
Wear suitable protective clothing, gloves and eye / face protection when using this product.